SIDING OVERHEAD RATE BENCHMARKS.
Siding contractors average about 14% overhead rate at $1M to $5M, rising to roughly 13% at $5M to $10M. The CFOS target at $1M to $5M is 13%, set a point leaner than your trade's average at your revenue. The point we take off is the easy one: overhead you're paying for and haven't costed to a job. The harder work is knowing the rate to the month and loading it into the bid, because a rate set a year ago is wrong in both directions.
In siding the access equipment and the warranty tail are the two places to look inside a 14 percent overhead rate, and the point down to 13 is worth $10,000 on a $1M year and $50,000 on a $5M year. Lifts, scaffolding, and swing stages either get a rate charged to the elevation that used them or they sit in overhead where the ranch-height work subsidizes the four-story work. A callback reserve belongs there too, funded rather than hoped for, because leak claims come in years after final payment. The siding overhead figure at this revenue is derived from the nearest comparable trade in the dataset rather than measured directly, so build your own before you price an elevation against it.
How to calculate your overhead rate: Total overhead divided by Total Revenue, times 100. Overhead is every cost not attributable to a job: office staff, rent, insurance, software, vehicles not charged to work, and owner salary. It moves every month with revenue, which is why a rate set a year ago is wrong in both directions.
SIDING FINANCIAL BENCHMARKS. WHERE YOU SHOULD BE.
| METRIC | INDUSTRY AVERAGE | CFOS TARGET | AT $10M TO $25M | NOTES |
|---|---|---|---|---|
| Overhead Rate ($1M to $5M) | 14% | 13% | 12% | Industry figure rises to 13% at $5M to $10M and 12% at $10M to $25M. |
| Gross Margin ($1M to $5M) | 21% | 23.5% | 23% | Full detail on the gross margin page. |
| Net Profit Margin ($1M to $5M) | 7% | 10.5% | 11% | Full detail on the net profit margin page. |
| Days Sales Outstanding | 90 days | 45 days | 30 days | Ninety days is weak, 45 is the target, 30 is strong. Nothing else moves cash faster. |
Industry figures are the AVERAGE for the trade at each revenue band, from the SPM Trade Benchmark Reference, not a floor. Net profit is stated before taxes. The CFOS target is what we build toward. The third column is what companies at $10M to $25M average, shown for direction of travel; that is a larger company, which is a different thing from a better run one. The overhead rate figures for siding are derived from the nearest comparable trade in the same dataset, so treat them as a reasonable starting point and not a survey result.
Gross margin and overhead come from CFMA, Jones Maresca and SPM's own trade data, because those are the figures those sources report by trade and size. Net profit is calculated from them as gross margin minus overhead, so the three rows tie. That makes it an operating profit figure: what is left before interest, other income and expense, and the tax planning choices owners make, such as bonuses, depreciation methods and retirement contributions.
Surveys report net income before taxes after those items, so a reported net can run below the figure here. At the typical contractor the difference is small: CFMA's 2025 medians are 7.1 percent before interest and taxes and 6.7 percent net income before taxes. It grows with size. Against the separate measured net profit dataset, the calculated net runs 0.8 points higher at $1M to $5M, 2.2 points at $5M to $10M and 3.5 points at $10M to $25M, because the gross margin and overhead rows change faster with size than reported net profit does. The bands above the $10M to $25M band are published at runoncfos.com as a modeled extension of the same curves. They have not been reconciled against the licensed CFMA Benchmarker, and the calculated net there runs well above survey medians, so read them as a model and not as a survey result.
Trade figures are from the SPM Trade Benchmark Reference, 48 trades, published by Sulphur Prairie Management, LLC. Net profit is stated before taxes, on the same basis CFMA reports, so the two are directly comparable. Re-validate against CFMA reporting on the normal quarterly cycle, per the benchmark reference's own instruction.
The reference itself is published at where this siding reference is published.
- 2024 Construction Financial Benchmarker, Executive Summary, Construction Financial Management Association, 2024. 21.8% gross profit margin, 11.8% SG&A and 6.3% net income before taxes across all respondents, with a best-in-class top quartile at 11.9% net income before taxes.
- 2025 Construction Financial Benchmarker, Construction Financial Management Association, 2025. 6.7% net income before taxes (6.3% in 2023), a 7.1% EBIT margin and an 8.8% EBITDA margin at the median, with interest coverage of 30.4 times, across the 1,558 companies in the 2025 analysis (fiscal year 2024 results).
- 2025 Performance Benchmarks, Construction Companies, Jones Maresca and Company, 2025. Specialty contractor gross margin of 15% to 25%, net profit of 5% to 8% for a well managed company, and total indirect cost of 8% to 15%.
The same metric across every trade is published on Overhead Rates by Trade, and the full dataset for all 48 trades across the published revenue bands is available as JSON and CSV, with one plain-language statement per row. Free to use with attribution.
FLAT MONTHLY FEE. NO SURPRISES.
Priced by trailing 12 month revenue. No hourly billing. No payroll. The one-time onboarding fee is right here in the table.
| Last 12 months revenue | Monthly fee | One-time onboarding |
|---|---|---|
| Up to $1M | $1,900 to $2,900 | $1,000 |
| $1M to $3.5M | $2,600 to $3,900 | $1,500 |
| $3.5M to $6.5M | $3,800 to $5,700 | $3,000 |
| $6.5M to $9.5M | $5,100 to $7,100 | $4,500 |
| $9.5M to $12.5M | $6,100 to $8,500 | $6,000 |
| $12.5M to $15.5M | $7,400 to $11,000 | $7,500 |
| $15.5M to $18.5M | $9,400 to $13,500 | $9,000 |
| $18.5M+ | Quoted individually | Quoted individually |
The onboarding fee covers migrating your books back to the start of your last taxable year and getting you fully operational in 60 days. It's billed once, with your first invoice. It's the same for all three tiers. Your first month is prorated, and your monthly engagement starts on the first of the first full month.
Range reflects the three tiers below. Which one you're in depends on how much of the work you want off your desk. No payroll. No hidden line items. The onboarding fee is right here in the table.
You stop guessing.
You get the CFO work. Job costing built against the way you estimate, a 13 week cash forecast, monthly WIP, and a meeting every month that ends in decisions and never in a report.
Your bookkeeper still does the books.
You stop touching the books.
Everything in Core, and we run the bookkeeping and the controllership as well. Your office stops answering coding questions and stops chasing a reconciliation on the last day of the month.
We do the books. No payroll.
Every job shows its margin while it's still running.
Everything in Executive, plus the job costing and WIP platform set up, loaded with your cost codes, and managed for you every month. You never have to learn it.
We do the books, the job costing, and the software. No payroll.
FREQUENTLY ASKED.
